LG BP220 User Manual

Connecting 21
Connecting
2
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (
b
).
2. Read the preparations for the network settings
and then press ENTER (
b
) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
Advanced Setting
If you want to set the network settings manually,
use
w/s
to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (
b
).
1. Use
w/s/a/d
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
w/s/
a/d
and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
,
Note
3. Select [Next] and press ENTER (
b
) to apply
network settings.
Network connection status is displayed on the
screen.
4. Press ENTER (
b
) while [Close] is highlighted to
finish the wired network settings.

LG BP220 Specifications

General

Depth	197 mm
Width	430 mm
Height	41 mm
Weight	1814 g
Full HD	Yes
Device type	Blu-Ray player
HDMI version	1.4
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS
Disc types supported	BD-R, BD-RE, BD-ROM, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-ROM, DVD-RW
Playback disc formats	Blu-Ray video, CD audio
Supported video modes	-
Card reader integrated	No
USB 2.0 ports quantity	1
Audio formats supported	AAC, LPCM, MP1, MP2, MP3, WMA
Video formats supported	3GP, AVCHD, FLV, M4V, MKV, MPEG2, MPEG4, VOB, WMV
Power consumption (standby)	0.5 W
Power consumption (typical)	12 W
Audio output channels	2.0 channels