Operating 31
Operating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, USB 1, AUX 1, AUX 2, FM)
1. Connect the USB device to the unit.
2. Press F to select a function you want to record.
3. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit.
Function Status Result
CD, USB 1
Play/Pause Recorded until stop
Resume stop
(Page 34)
Quick recorded the latest
song
Full stop
Quick recorded All songs
In case below, scope is
limited.
- After File search (Page
19), quick recorded an
indexed song.
- Only while the Folder
name is displayed on the
display window, quick
recording All songs on
Folder. (Folder Search
Mode is released when
there is no button input
for a few seconds after
entering the folder search
mode.) (Page 19)
- After JUKE BOX On
(Page 33), quick
recorded All songs of
JUKE BOX.
AUX 1,
AUX 2,
FM
- Recorded until stop
- If you connect both USB 1 and USB 2,
press USB REC on the remote control or
USB REC / DEMO on the unit when USB 1 or
USB2 which you want to record blinks in the
display window.
To stop recording
To stop recording, press USB REC on the remote
control or USB REC / DEMO on the unit.
To select recording bit rate
1. Press and hold USB REC on the remote control
or USB REC / DEMO on the unit for 3 seconds.
2. Press C/V to select a bit rate.
3. Press USB REC on the remote control or
USB REC / DEMO on the unit to finish the
setting.
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
To Next Page
Loading...
General
