Operating22
Operating
3
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned o.
To cancel the sleep function, press SLEEP on the
remote control repeatedly until “SLEEP 10” appears,
and then press SLEEP on the remote control once
again while “SLEEP 10” is displayed.
y
You can check the remaining time before
the unit is turned o.
y
Press SLEEP. The remaining time appears in
the display window.
,
Note
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until dim o.
Advanced Operations
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device.
(Refer to the page 13)
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing
1
/
!
.
3. Select the PORTABLE or AUX function by
pressing FUNCTION on the remote control or
AUX/PORT. IN on the unit.
4. Turn the portable player or external device and
start it playing.
Changing the lighting effect
You can change the unit’s lighting eects by
pressing LIGHTING EFFECT on the unit in 5 types.
(Forward Level Mode -> Peak Level Mode -> Center
Level Mode -> Reverse Level Mode -> Shower Level
Mode)
Woofer ON/OFF
You can power on or o the woofer by pressing
WOOFER ON/OFF on the unit.
Woofer sound is not outputted in AM function.
And WOOFER ON/OFF button’s light is turned
o.
,
Note
To Next Page
Loading...
Need help?
General
