ENGLISH
THE LED DISPLAY
The LED display shows the settings, estimated time remaining, options, and status messages
for your dryer. When the dryer is turned on, the light in the display will illuminate.
CHECK FILTER REMINDER
The display will show CHK.FILTER when the
dryer is turned on as a reminder to check
the filter. It turns off when the START/PAUSE
button is pressed.
A
B
STATUS/CYCLE DISPLAY
This portion of the display shows the
selected cycle, operating status, and special
messages. If a cycle has special instructions,
they will also be displayed in this area.
C
D
ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed,
the dryer will display the estimated (SENSOR
DRY) or set time (TIME DRY) remaining, and
begin tumbling.
NOTE: The cycle time on SENSOR
DRY cycles may fluctuate as the dryer
recalculates drying time for optimal results.
CYCLE COMPLETION INDICATOR
Shows how much of the current
drying cycle has been completed.
A
B
C
D
29
To Next Page
Loading...
Need help?
General
