ENGLISH
CYCLE OPTION BUTTONS
Your dryer features several additional cycle
options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
CHILD LOCK
Use this option to prevent
unwanted use of the dryer
or to keep cycle settings from
being changed while the dryer
is operating. Press and hold the OPTION
button for 3 seconds to activate or deactivate the
CHILD LOCK function.
The child lock indicator will be shown in the display,
and all buttons are disabled except the POWER
button.
NOTE: CHILD LOCK lasts after the end of cycle.
If you want to deactivate this function,
press and hold the OPTION button for 3 seconds.
WRINKLE CARE
Selecting this option will tumble the
load periodically for up to 3 hours after
the selected cycle, or until the door is
opened. This is helpful in preventing
wrinkles when you are unable to immediately
remove items from the dryer.
DAMP DRY SIGNAL
With this option, the dryer will signal
when the load is approximately 80%
dry. This allows you to remove faster-
drying lightweight items or items
that you would like to iron or hang while still
slightly damp.
To Add Cycle Options to a Cycle:
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
Use the cycle settings buttons to adjust the
settings for that cycle.
Press the cycle option button(s) for the
option you would like to add. A confirmation
message will be shown in the display.
Press the START/PAUSE button to start the
cycle. The dryer will start automatically.
1
2
3
4
31
To Next Page
Loading...
Need help?
General
