Special Functions. (cont.)
* Child Lock
Use this option to prevent unwanted use of the dryer
or to keep cycle settings from being changed while the
dryer is operating. Press and hold the Damp Dry Signal
button for 3 seconds to activate or deactivate the Child
Lock function.
The Child Lock icon will be shown in the display, and all
controls are disabled except the POWER button.
NOTE
Once set, Child Lock remains active until it is manually
deactivated. Child Lock must be turned off to run
another cycle. To deactivate Child Lock, press and hold
the Damp Dry Signal button for three seconds.
Energy Saver
This option helps to reduce the energy consumption in
the Normal cycle, depending on the load size.
The drying time will be changed when the Energy Saver
option is selected.
NOTE
The Energy Saver option is turned on by default in the
Normal cycle.
For faster drying in the Normal cycle, turn off the
Energy Saver option.
Custom Program
If you have a special combination of settings that you
use frequently, you can save these settings as a Custom
Program..
* To Save a Custom Program:
1. Turn on the dryer and press the Cycle Buttons to select
the desired cycle.
2. Use the cycle setting buttons to adjust the settings for
that cycle.
3. Press the cycle option button(s) for the option you
would like to add.
4. Press and hold the Custom PGM button for 3 seconds.
NOTE
You may save only one custom program at a time.
Pressing and holding the Custom PGM button will
overwrite any previously saved custom program.
To Recall a Custom Program:
1. Turn on the dryer.
2. Press the Custom PGM button.
3. Press the START/PAUSE button to start the cycle.
Steam Functions
LG’s new steam technology allows you to inject fabrics
with a swirling jet of hot steam to refresh clothes, reduce
static, and make ironing easier.
Simply select the Steam Fresh™ cycle, or you can add a
steam option to selected cycles.
Using the Steam Fresh™ cycle
Steam Fresh™ uses the power of steam alone to quickly
reduce wrinkles and odor in fabrics. It brings new life to
wrinkled clothes that have been stored for an extended
time and makes heavily wrinkled clothes easier to iron.
Steam Fresh™ can also be used to help reduce odors in
fabrics.
Using the Wrinkle Free cycle
Use to remove wrinkles, including from loads left in the
dryer too long. This is helpful in preventing wrinkles
when you are unable to remove items from the dryer
immediately.
NOTE
• If you will be on vacation or not using your dryer
for an extended period of time, you should turn off
the water supply to the dryer. This helps to avoid
unintended flooding (due to a water pressure surge)
while you are away.
HOW TO USE
To Next Page
Loading...
Need help?
General
