16
1. Open the door to reverse.
2. Check screws to remove (Left 4, Right 2).
3. Remove 2 dummy screws by driver.
Reversing the door
4. Remove two screws and disassembly latch.
5. Hold on the hinge while remove 2 screws of hinge (to prevent
door dropping).
6. Remove door from cabinet cover.
Hinge
Dummy
Screw
Open Door
Remove
Door
Hinge Screw
Latch Screw
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
w
WARNING
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow
the instructions below can result in damage to the dryer,
property damage or injury to persons.
MFL62512861_en_111221.indd 16 2011.12.21 10:34:53 AM