To Next Page

To Previous Page

ENGLISH

OPTIONAL ACCESSORIES

Stacking kit installation

This stacking kit includes:

• Two (2) side rails

• One (1) front rail

• Four (4) screws

Tools needed for installation:

• Phillips screwdriver

To ensure safe and secure installation, please observe the

following instructions.

WARNING

• 

• 





There is a risk of serious back injury or other injuries.

• 

Failure to follow

this warning can result in serious injury.

• 

Failure to follow

this warning can result in serious injury.

•  Failure to follow

this warning can result in serious injury.

• 



 Failure to do so can result in electrical shock, fire,

explosion, or death.

1. Make sure the surface of the washer is clean and dry. Remove

paper backing from the tape on one of the stacking kit side

brackets.

2. Fit the side bracket to the side of the washer top as shown in

the above illustration. Firmly press the adhesive area of the

bracket to the washer surface. Secure the side bracket to the

washer with a screw on the back side of the bracket. Repeat

steps 1 and 2 to attach the other side bracket.

OPTIONAL ACCESSORIES OPTIONAL ACCESSORIES

MFL62512861_en_111221.indd 39 2011.12.21 10:35:39 AM

LG DLG2251W User Manual

Questions and Answers: