To Next Page

To Previous Page

24 OPERATION

Control Panel

Control Panel Features

a Power Button

• Press the button to turn the appliance on. Press again to turn the appliance off.

NOTE

• Pressing the Power button during a cycle will cancel that cycle and any load settings will be lost.

b Cycle Selector Knob

• Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard

presets will be shown in the display. On Manual Dry cycles, these settings can be adjusted using the

cycle modifier buttons anytime before starting the cycle.

c Start/Pause Button

• Press this button to start the selected cycle. If the appliance is running, use this button to pause the

cycle without losing the current settings.

NOTE

• If you do not press the Start/Pause button to resume a cycle within a certain time, the appliance turns

off automatically and all cycle settings are lost.

d Extra Options and Functions / Cycle Modifier Buttons

• Use these buttons to select the desired options for the selected cycle. Not all options are available for

each cycle.

• Remote Start

- With the LG ThinQ app, you can use a smartphone to control your appliance remotely.

• Wi-Fi

- Press and hold the Wrinkle Care button for 3 seconds to initiate the connection of the appliance to

the LG ThinQ application.

e Time and Status Display

• The display shows the settings, estimated time remaining, options, and status messages for the

appliance. When the appliance is turned on, the default settings in the display will illuminate.

Questions and Answers:

Need help?

Do you have a question about the LG DLHC1455W and is the answer not in the manual?

LG DLHC1455W Specifications

General

Type	front load; heat pump
Color	white
Dryer Capactity	4.2 cu. ft.
Number of Cycles	14 normal, heavy duty, bulky/large, small load, towels, sportswear, antibacterial, delicates, wool, perm press, rack dry(maual dry), heated dry (manual dry), air dry (manual dry), downloaded
Number of Options	12 more time, less time, wrinkle care, control lock, wi-fi, pgm save, custom pgm, remote start, condenser care, drum care, drum light, signal
Drying Levels	very dry, normal dry, damp dry
Venting	ventless
Temperature Settings	3
Control Panel	digital and knobs
Cycle Signal	yes
Interior Light	yes
Sensor Dry Option	yes
Smart Home	yes; thinq®
Wi-Fi	yes
Electrical Requirements	120/240v, 60hz, 3.1a 120/208v, 60hz, 3.5a
Voltage	240/208 volts
Current	30