36 OPERATION
Options and Extra Functions
Your dryer includes several additional cycle
options to customize cycles to meet your individual
needs.
Select the desired option after selecting the
desired cycle and settings.
• The LED for the option will light up when the
option is selected.
• To protect your garments, not every option is
available with every cycle.
Damp Signal
When this option is selected, the appliance signals
when the load is approximately 80% dry. This
allows you to remove faster-drying lightweight
items or items that you would like to iron or hang
while they are still slightly damp.
Press the Damp Signal button.
Signal
The volume of the notification sounds and button
sounds can be set from quiet to very loud.
• Default volume is Very High and can be adjusted.
- Volume: Off, Low, Medium, High, Very High
Drum Light
The drum is equipped with a white LED light that
illuminates when the dryer is turned on. This light
automatically turns off when the door is closed
and the cycle starts.
• To manually turn the light on, press the Drum
Light button.
• The drum light will turn off automatically after 4
minutes.
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 2 hours after the selected
cycle, or until the door is opened. This is helpful in
preventing wrinkles when you are unable to
remove items from the dryer immediately.
Press the Wrinkle Care button before you start a
dry cycle.
• When the option is turned on, only the Power
button works after the dry cycle ends.
• To select the option after starting a cycle, pause
the cycle, set the option, and press Start/Pause.
• Always turn off the appliance before unloading
the clothes.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating the dryer.
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked, the Control Lock
indicator lights up and the dry cycle is shown on
the display.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
• To activate/deactivate the function, turn the
dryer on, press the Options button, turn the
knob to select Control Lock, and press the
8
(OK) button. Select Off and press the
8 (OK)
button.
Cycle List Edit
Edit the list of dry cycles as desired.
1 Press the Options button.
2 Turn the knob to select Cycle List Edit, and
press the
8 (OK) button.
3 Select a dry cycle and press the 8 (OK)
button.
•The Normal cycle cannot be deleted.
• The order of cycles in the list can be changed. On
the product, use the Auto Cycle Optimization
function in the Additional Settings menu. In the
To Next Page
Loading...
Need help?
General
