Test operation
9
1
Preparation
for washing.
·Connect the power plug to the
outlet.
·Connect the inlet hose.
2
Press the power button.
3
Press the START/PAUSE
button.
6
Check the water heating.
·Press “Temp.” button,
the present temperature will
be displayed.
·Check if the drum rotates
clockwise and counterclockwise.
5
Check automatic reverse turn.
4
Check the water supply.
·Check if water is supplied through
the detergent dispenser.
7
Check drain and spin.
·Power off and then power on.
Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.
·Check drain and spin.
·Power off and then power on.
·Check if the door can be opened
after Door Lock lamp turns off.
8
Power off and open the door.
9
Water removal.
·If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
·In case of cotton program.
To Next Page
Loading...
Need help?
General
