15
2. If the floor is uneven, turn the adjustable
feet as required (do not insert pieces of
wood etc. under the feet).
Make sure that all four feet are stable and
resting on the floor and then check that
the appliance is perfectly level (use a spirit
level).
1. Leveling the washing machine properly
prevents excessive noise and vibration.
Install the appliance on a solid and level
floor surface, preferably in a corner of the
room.
Installation
■ Leveling
• Once the washer is level, tighten the lock
nuts up towards the base of the washer.
All lock nuts must be tightened.
• Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
the machine should not move up and down
at all (Please, check both directions).
If machine rocks when pushing the
machine top plate diagonally, adjust the
feet again.
Raise Lower
Lock
Nut
Tighten all 4
locknuts securely
• Timber or suspended type flooring
may contribute to excessive
vibration and unbalance.
• Do not install the machine on a raised platform.
NOTE
NOTE
To Next Page
Loading...
Need help?
General
