LG F14A8RDS Series User Manual

24
How to use washer
• Spin Speed level can be selected by
pressing 'Spin' button repeatedly.
1. Press the Power button.
2. Press only the Spin button to select
RPM.
3. Press the Start/Pause.
Spin only
• Time Save : This option can be used to
reduce the time of a wash program.
It is best used on lightly soiled loads.
• Intensive : If a normal load is heavily
soiled, “Intensive” option is effective.
• Rinse
+
: Adds an additional rinse.
• Rinse Hold :
- Rinse Hold is selected by pressing the
spin button repeatedly this function
leaves clothes in the machine;
suspended in the water after the last
rinse without entering into spin.
- To proceed through to a drain or
spin.once the rinse hold function is
completed using to Program dial and
Spin button to the required program.
(Spin)
Option
• By pressing the Temp. button the water
temperature can be selected.
- Cold
- 30°C, 40°C, 60°C, 95°C
• Water temperature selection is limited in
certain programs.
Temp.
Spin
■ Options ■ Other functions
1. Press the Power button.
2. Select the Refresh program.
3. Press the Steam Wash button
repeatedly until the correct item is
displayed.
4. Press the Start/Pause button.
Refresh Cycle
• For better performance load 3 item or
less.
• When Refresh cycle finishes, laundry
will continue to be tumbled slowly for
up to 30 minutes to prevent wrinkling.
You can open the door in this time by
pressing any button.
NOTE
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.
NOTE

LG F14A8RDS Series Specifications

General

Brand	LG
Model	F14A8RDS Series
Category	Washer
Language	English