14
ASSEMBLING AND PREPARING
y
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ slightly from that shown in
this manual.
y
The available menus and options may differ from the input source or
product model that you are using.
y
New features may be added to this TV in the future.
y
The TV can be placed in standby mode in order to reduce the power
consumption. And the TV should be turned off if it will not be watched for
some time, as this will reduce energy consumption.
y
The energy consumed during use can be significantly reduced if the level
of brightness of the picture is reduced, and this will reduce the overall
running cost.
NOTE
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing ac-
cessories, contact the local dealer where you purchased your product. The
illustrations in this manual may differ from the actual product and item.
y
Do not use any unapproved items to ensure the safety and product life
span.
y
Any damages or injuries by using unapproved items are not covered by
the warranty.
y
Some models have a thin film attached on to the screen and this must not
be removed.
CAUTION
To Next Page
Loading...
Need help?
General
