USING YOUR REFRIGERATOR
23
• ,
toward you .
Tilt the shelf (as shown in figure) and then pull it
• Pull the shelf towards the front . The shelf hook will
contact the support on the guide. Lift the shelf so the
hook clears the guide support (view detail).
Hook
1
Support
guide
3
2
2
3
? Shelf Freezer wire
Detail
Hook
Shelf Freezer wire
Shelf Freezer glass
WATER FILTER
Before removing or installing water filter:
1.
Take out the top shelf and move it to the lowest level.
• Filter Reset: When the Filter reset icon turns on, you have
to change the water filter. Press the Filter Reset button
(See the Control Panel Features for reference) for 3
seconds to turn the icon off.
IMPORTANT: Turn off household water supply.
2.
A
Removing the water filter
For first-time installation, remove filter substitute cap (A) by
turning it counterclockwise and pulling it down. The
substitute cap must be retained for the future. If the
filter is removed and not replaced, it is necessary to
reinstall the substitute cap to prevent water leaks from
the filter housing.
To Next Page
Loading...
Need help?
General
