CARE AND CLEANING
27
7. Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they don’t scrape the
floor. See the DOOR ALIGNMENT section.
8. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back
and refer to the REFRIGERATION INSTALLATION
section for setup instructions.
WHEN YOU SHOULD SET THE ICEMAKER
POWER SWITCH TO (OFF)
When the water supply will be shut off for several
When the ice storage bin is removed for more than a
minute or two.
When the refrigerator will not be used for several
NORMAL SOUNDS YOU MAY HEAR
The icemaker water valve will buzz as the icemaker
fills ON with water. If the power switch is in the
position, it will buzz even if it has not yet been hooked
up to water. To stop the buzzing, move the power
NOTE: Keep the power switch in the ON position
before the water line is connected can damage the
icemaker.
You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.
hours.
days.
switch to OFF position.
To Next Page
Loading...
Need help?
General
