REFRIGERATOR INSTALLATION
8
(Identify your handle type)
You may have to remove the door handles to move the
refrigerator through a narrow opening. See instructions
below.
NOTE: To avoid damaging door surfaces when moving the
refrigerator through narrow openings, it is ALWAYS
recommended to remove the doors as instructed in
the next two pages.
HANDLE REMOVAL
• Grasp the handle tigthtly with both hands and slide the
handle up (1) (this may required some force).
• The keyhole slots (2) on the back of the handle allow
the handle to separate from the mounting screws (3).
Keyhole slots
on back of
handle
Screws
mounted
on door
CAUTION: It could be damaged and broken when
you hit with hammer while you remove and attach
the handle.
CAUTION: When you assemble or dissasemble
handle, you must push and pull with moment force.
•
NOTE: If
Loosen the set screws with a 3/32” (2.38 mm) Allen
wrench and remove the handle.
the handle mounting fasteners need to be
tightened or moved, use a ¼” (6.35 mm) Allen
wrench.
Mounting
fasteners
Set screw
Allen Wrench
To Next Page
Loading...
Need help?
General
