Getting Started10
Getting Started
1
Charging the Unit
Connecting the AC adapter
This device uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of of the unit.
3. Plug the AC adapter into an AC outlet.
(Not supplied)
If the battery is fully charged in charging mode,
the indicator is changed from red to green.
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.8 A) with this speaker because of danger
of explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
>
Caution
Checking the charging status
When AC Adapter is connected, battery charging is
started. If the power turned on, you can check the
charging status by pressing
1/!
button.
y
Operating time is approx. 15 hours.
It may vary depending on the battery status
and operational conditions.
y
If listening to music while charging, it will take
longer to charge.
,
Note
To Next Page
Loading...
Need help?
General
