Stacking the speakers
You can listen to the best sound quality when you
stack the speakers. Refer to the below.
Before stacking
You have to position the unit and the speakers
before connecting the speakers. Note that the
illustrations below are dier from the actual unit.
Stacking the speakers
1. You install Subwoofer speaker on a flat surface.
(It is recommended that at least two people to
carry by left and right).
2. Attach the rubber foot on the Subwoofer
speaker.
3. As shown below, Front speaker place on
Subwoofer speaker.
Do not remove the Rubber foot after the
attachment. When it is removed, there will be
sticking trace left.
,
Note
y
Do not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
y
When you connect the speakers to the unit,
make sure to connect the speaker’s cable
and plug to the corresponding speaker
connector.
y
Check the volume level before playing
music to prevent inrm, child, and pregnant
women from being shocked by the sudden
and loud sound from the unit.
y
Do not use the unit in a limited space.
It may damage a person’s hearing. It is
recommended to use it in a wide space.
y
Be careful to make sure children not to put
their hands or any objects into the opening
speaker duct hole.
y
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
y
Avoid looking at the speaker lights for a
long time. It may cause damage to eyesight.
>
Caution
To Next Page
Loading...
Need help?
General
