-17-
PARTS OF THE RANGE HOOD
3 LIGHTS BUTTON
•
The light has two levels: High and Low.
• From off, press one time for High. Press again for
Low. Press again to power lights off.
• Press and hold the Light button for 3 seconds to
connect to a home Wi-Fi network. See page 8 for
more information.
4 DISPLAY INDICATORS
Mesh Filter Clean Reminder (always enabled)
•
After 30 hours of fan usage, the button indicator
will begin to slowly blink indicating it is time to clean
the mesh filters.
•
To reset: With hood off: hold the button for three
seconds. All LED indicators will blink two times
confirming the 30 hour timer has been reset.
Charcoal Filter Replace Indicator
(disabled by
default, must be enabled if recirculating hood)
•
To enable Charcoal Filter Replacement Reminder:
With hood off, hold button and button
simultaneously for two seconds. All LED indicators
will blink two times confirming the Charcoal Filter
Replace Reminder is disabled.
•
To disable Charcoal Filter Replacement Reminder:
With hood off, hold button and button
simultaneously for two seconds. All LED indicators
will blink two times confirming the Charcoal Filter
Replace Reminder is disabled.
•
After 120 hours of fan usage the button will
slowly blink indicating the charcoal filters need
replacment.
•
To reset: With hood off, hold the button for two
seconds. All LED indicators will blink two times
confirming the 120 hour timer has been reset.
To Next Page
Loading...
Need help?
General
