3 Operating
Operating26
Operating
3
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the input source to USB by pressing F
button on the remote control or unit repeatedly.
To Do this
Playback
Press
dM
.
Pause
During playback, press
dM
.
Skip to the next/
previous le
During playback, press V on
the remote control to go to the
next le.
Playing less than 2 seconds,
press C on the remote
control to go to the previous
le.
Playing after 3 seconds, press
C on the remote control to
go to the beginning of the le.
Search for a
section within a
le
Press and hold
C/V
during playback and release it
at the point you want to listen
to.
Resume
playback
This unit memorizes a current
song which is played before
changing the function or
turning off the unit.
y
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
y
If the USB function is not working, check the
USB function is selected.
y
When you pause the USB playback, USB LED
on the main unit blinks.
,
Note
Other operations
Turn off the sound temporarily
Press (Mute) to mute your unit.
To cancel it, press
(Mute) again on the remote
control or change the volume level.
Using your TV remote control
You can control some functions of this unit by your
TV's remote control even by another company’s
product. Controllable functions are volume up/down
and mute.
Press and hold BASS BLAST on the remote control
for about 2 seconds.
To turn off this function, press and hold CINEMA on
the remote control for about 2 seconds.
y
Supported TV brands
LG Panasonic Philips Samsung
Sharp Sony Toshiba Vizio
y
Make sure that the sound output of your TV
is set to [External speaker].
y
Depending on the remote control, this
function may not work well.
y
This function does not operate on LG TV's
Magic Remote controls.
y
This function may not work well when some
TV control functions such as CEC, SIMPLINK
and LG Sound Sync set to ON.
,
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
