Operating 33
Operating
3
Sound adjustment
Setting sound effect
This system has a number of pre-set surround sound
fields. You can select a desired sound mode by using
each sound effect buttons.
The displayed items for the equalizer may be different
depending on sound sources and effects.
Sound effect Description
ASC
(Adaptive Sound
Control)
Analyzes the property of the
input sound and provides
the sound optimized for the
content in real time.
BASS BLAST
Reinforces the treble, bass and
surround sound effect.
CINEMA
You can enjoy more immersive
and cinematic surround sound.
y
In some of the sound effect modes, there will
be no sound or low sound from some of the
speakers. It depends on the mode of sound
and the source of audio, it is not a defect.
y
You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound le changed.
,
Note
Adjust the subwoofer level
settings
You can adjust the sound level of subwoofer as your
preference.
Press WOOFER LEVEL
o
/
p
button to adjust
woofer level.
When the subwoofer level reaches maximum or
minimum , standby LED (Red) on the main unit
turns on for 2 seconds.
,
Note
Adjust the rear speakers level
settings (Optional)
You can adjust the sound level of rear speakers as
your preference.
Press REAR LEVEL
o
/
p
button to adjust rear
speakers
y
When the rear speaers level reaches
maximum or minimum , standby LED (Red) on
the main unit turns on for 2 seconds.
y
Adjusting rear speakers level is applyed only
when the rear speakers are connected.
,
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
