LG SK5 User Manual

Connecting 15
Connecting
2
Wireless subwoofer
connection
LED indicator of wireless subwoofer
LED Color Status
Green
(Blink)
Attempting to make connection.
Green The connection is completed.
Red The wireless subwoofer is in
standby mode or the connection
is failed.
Off
(No display)
The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer for
the first time
1. Connect the power cord to the subwoofer and
plug the power cord into a power outlet.
2. Turn on the main unit : The sound bar and wireless
subwoofer will be automatically connected.
- Green LED on the rear of wireless subwoofer
turns on.
Manually pairing wireless subwoofer
When your connection is not completed, you can
check red LED on the wireless subwoofer and the
wireless subwoofer does not make sound. To solve
the problem, follow the steps below.
1. Press Pairing button on the rear of the wireless
subwoofer.
- The green LED on the rear of the wireless
subwoofer blinks quickly. (If the green LED
does not blink, press and hold the Pairing
button.)
2. Turn on the main unit.
3. Pairing is completed.
- The green LED on the rear of the wireless
subwoofer turns on.

LG SK5 Specifications

General

Master (outer) case width	984 mm
Master (outer) case height	416 mm
Master (outer) case length	217 mm
Equalizer	Yes
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	360 W
Audio output channels	2.1 channels
Subwoofer location	Separate
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
HDMI version	1.4
Bluetooth version	4.0
Number of HDMI outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Digital audio coaxial in	-
Cables included	Optical
Subwoofer driver diameter (imperial)	6 \
Product color	Black
Audio formats supported	AAC, AAC+, FLAC, MP3, OGG, WAV, WMA
Consumer Electronics Control (CEC)	SimpLink
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	26 W
Package weight	9760 g
Tweeter diameter	20 mm
Tweeter impedance	4 Ω
Soundbar speaker RMS power	160 W
Signal-to-Noise Ratio (SNR)	82 dB

Weight and Dimensions

Depth	87.8 mm
Width	891 mm
Height	57.5 mm
Soundbar weight	2350 g
Subwoofer depth	248.5 mm
Subwoofer width	171 mm
Subwoofer height	393 mm
Subwoofer weight	5300 g