Operating26
Operating
3
Auto function change
This unit recognizes input signals such as Optical,
Bluetooth, LG TV and Portable and then changes
suitable function automatically.
When optical signal comes in
When you turn on the external device connected to
this unit by an optical cable, this unit changes the
function to optical. You can hear the sound from your
device.
When you try to connect BLUETOOTH
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV signal comes in
When you turn on your LG TV connected by LG
Sound Sync (Wireless connection), this unit changes
the function to LG TV. You can hear the sound from
your TV.
When connect a Portable device
When you connect your portable device using the 3.5
mm stereo cable, this unit changes the function to
Portable. You can hear the music from your device.
y
To change to optical function, it needs 5
seconds of no signal.
y
This unit does not change the function to
optical if SIMPLINK of the connected TV, Blu-
ray disc player, set-top box or etc. device set
to on or connected CEC supported device is
turned on.
If you want to use the auto function change,
trun off SIMPLINK function on your LG TV.
It takes for about 30 seconds to turn off
SIMPLINK.
y
If the Bluetooth connection lock function
is set, Bluetooth connection will be only
available on BT (Bluetooth) and LG TV
function. (Page 28)
,
Note
Quick Start
This unit can stay in standby mode with low power
consumption, so that the unit can reduce boot time
when you turn on this unit.
To turn on this function, press
1
on the unit for 3
seconds when the unit is turned on.
All of the function LEDs blink twice.
To turn off this function, press
1
on the unit for 3
seconds again when the unit is turned on.
The standby LED blinks twice and turn on the currnet
function's LED.
y
If the Quick start function is set and an AC
power is accidently re-connected to the unit
by power failure etc., the Quick start function
will activate when the unit is turned on and
off once.
y
When the Quick start function is set, power
consumption will be higher than when the
Quick start is off.
y
This function may not work depending on the
models.
,
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
