EasyManuals Logo
Home>LG>Speaker System>SK5

LG SK5 User Manual

LG SK5
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Connecting 17
Connecting
2
LG Sound Sync
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo on
your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending on
the capabilities of your equipment.
y
You can also use the remote control of this
unit while using LG Sound Sync. If you use TV's
remote control again, the unit synchronizes
with the TV.
y
When the connection fails, make sure of the
condition of the TV and power.
y
Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
- The unit is turned off.
- Changing the function to the others.
- Disconnecting the optical cable.
- Disconnecting the wireless connection
caused by interference or a distance.
y
The amount of time to turn off this unit is
different depending on your TV when you set
AUTO POWER function to ON.
y
Details of TV setting menu vary depending on
the models of your TV.
,
Note
LG Sound Sync with wired connection
1. Connect your LG TV to the unit by using an
optical cable.
Optical
cable
2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[LG Sound Sync (Optical)]
3. Turn on the unit by pressing
1
on the remote
control or on unit.
4. Select the input source to OPTICAL by pressing
F button on the remote control or on unit
repeatedly.
LG Sound Sync with wireless
connection
1. Turn on the unit by pressing
1
on the remote
control or on unit.
2. Select the input source to LG TV by pressing F
button on the remote control or unit repeatedly.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[LG Sound Sync (Wireless)]
If you turned off the unit directly by pressing
1
on the remote control or on unit, LG Sound
Sync (Wireless) will be disconnected. To use this
function again, you should reconnect the TV and
the unit.
,
Note

Other manuals for LG SK5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG SK5 and is the answer not in the manual?

LG SK5 Specifications

General IconGeneral
Master (outer) case width984 mm
Master (outer) case height416 mm
Master (outer) case length217 mm
EqualizerYes
Audio decodersDTS Digital Surround, Dolby Digital
RMS rated power360 W
Audio output channels2.1 channels
Subwoofer locationSeparate
Subwoofer sensitivity85 dB
Subwoofer connectivityWireless
HDMI version1.4
Bluetooth version4.0
Number of HDMI outputs1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWired & Wireless
Digital audio coaxial in-
Cables includedOptical
Subwoofer driver diameter (imperial)6 \
Product colorBlack
Audio formats supportedAAC, AAC+, FLAC, MP3, OGG, WAV, WMA
Consumer Electronics Control (CEC)SimpLink
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)26 W
Package weight9760 g
Tweeter diameter20 mm
Tweeter impedance4 Ω
Soundbar speaker RMS power160 W
Signal-to-Noise Ratio (SNR)82 dB
Weight and Dimensions IconWeight and Dimensions
Depth87.8 mm
Width891 mm
Height57.5 mm
Soundbar weight2350 g
Subwoofer depth248.5 mm
Subwoofer width171 mm
Subwoofer height393 mm
Subwoofer weight5300 g

Related product manuals