LG SN6Y User Manual

Connecting22
Connecting
2
Connecting to your TV
Please connect with this unit and TV using the optical
digital cable or HDMI cable considering the state of
the TV.
Using an OPTICAL cable
1. Connect the OPTICAL IN jack on the back of the
unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Optical
cable
2. Select the input source to OPT/HDMI ARC by
pressing F repeatedly.
You can see “OPT” on the display window if
connecting normally between this unit and your
TV.
y
Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
y
You can enjoy the TV audio through the
speakers of this unit. In the case of some TV
models, you must select the external speaker
option from the TV menu. (For details,
reference your TV user manual.)
y
If this unit is connected by OPTICAL and ARC
at the same time, the ARC signal has a higher
priority.
,
Note
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo on
your TV.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Make one of the following connections, depending on
the capabilities of your equipment.
y
You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV.
According to TV Specications, the volume
and mute of this unit synchronize with TV.
y
When the connection fails, make sure of the
condition of the TV and power.
y
Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
- The unit is turned off.
- Changing the function to the others.
- Disconnecting the optical cable.
- Disconnecting the wireless connection
caused by interference or a distance.
y
The amount of time to turn off this unit is
different depending on your TV when you set
AUTO POWER function to ON.
,
Note

LG SN6Y Specifications

General

Woofer	Yes
Speaker type	3-way
Number of drivers	4
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	3.1 channels
Number of woofer drivers	1
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	420 W
Audio sample rate (24bit)	96 kHz
Product color	Black
Volume control	Digital
Recommended usage	Home
HDCP version	1.4
Bluetooth version	4.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power source type	USB
Power consumption (standby)	0.5 W
Power consumption (typical)	38 W
Subwoofer power consumption	33 W
Package weight	11802.47 g
Cables included	Optical
Other operating systems supported	Android, iOS
Soundbar speaker RMS power	- W
Subwoofer type	Active subwoofer
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Country of origin	China
Audio formats supported	AAC, AAC+, DTS, FLAC, LPCM, MP3, OGG, WAV

Weight and Dimensions

Depth	436.88 mm
Width	1158.24 mm
Height	226.06 mm
Weight	8754.33 g
Soundbar weight	3447.3 g
Subwoofer depth	292.1 mm
Subwoofer width	180.34 mm
Subwoofer height	391.16 mm
Subwoofer weight	5307 g