LG SN6Y User Manual

Connecting 27
Connecting
2
OPTICAL IN connection
Connect an optical output jack of external devices to
the OPTICAL IN jack.
Optical cable
To the optical output
jack of external device
1. Connect the OPTICAL IN jack on the back of the
unit to optical out jack of your external device.
2. Select the input source to OPT/HDMI ARC by
pressing F repeatedly.
You can see “OPT” on the display window if
connecting normally between this unit and your
device.
Before connecting the optical cable, be sure to
remove the protection plug cover if your cable
has the cover.
,
Note
Make sure to properly align and connect the
optical cable; improper alignment may cause
damage to the jack.
<O> <X>
Optical jack Optical cable Optical jack Optical cable
>
Caution
USB connection
Connect USB memory device to the USB port on the
back of the unit.
It is recommended that you purchase a USB
gender separately for the convenience of USB
insertion and extraction. (Recommended USB
gender type : USB 2.0 extension cable)
,
Note
For more information of playing les on a USB, refer
to the page 30.
Removing the USB Device from the unit.
1.
Choose a different function/mode.
2. Remove the USB device from the unit.
Compatible USB devices
y
MP3 Player : Flash type MP3 player.
y
USB Flash Drive : Devices that support USB 2.0.
y
The USB function of this unit does not support
some USB devices.

LG SN6Y Specifications

General

Woofer	Yes
Speaker type	3-way
Number of drivers	4
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	3.1 channels
Number of woofer drivers	1
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	420 W
Audio sample rate (24bit)	96 kHz
Product color	Black
Volume control	Digital
Recommended usage	Home
HDCP version	1.4
Bluetooth version	4.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power source type	USB
Power consumption (standby)	0.5 W
Power consumption (typical)	38 W
Subwoofer power consumption	33 W
Package weight	11802.47 g
Cables included	Optical
Other operating systems supported	Android, iOS
Soundbar speaker RMS power	- W
Subwoofer type	Active subwoofer
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Country of origin	China
Audio formats supported	AAC, AAC+, DTS, FLAC, LPCM, MP3, OGG, WAV

Weight and Dimensions

Depth	436.88 mm
Width	1158.24 mm
Height	226.06 mm
Weight	8754.33 g
Soundbar weight	3447.3 g
Subwoofer depth	292.1 mm
Subwoofer width	180.34 mm
Subwoofer height	391.16 mm
Subwoofer weight	5307 g