Advanced settings
26 Air-to-Water Heat Pump
Advanced settings
In this chapter you will find:
- How to set the parameters of the device in case the system has no spatial corrector or thermostat
built in or the settings for the temperature of heating water do not suffice the heating needs.
- How to set the control mode of the heating water.
- How to set the mode of operation for heating water/cooling water, heating/cooling circuits and heat-
ing of DHW.
- How to set working schedules ...
For easier understanding of the chapter, you can find a general scheme of the heating (cooling) sys-
tem below.
ELEMENTS MARK CHARACTERISTICS
A DHW room
B Mixing-heating circuits
C Heating water
D DHW
E Heating/cooling
F Heat pump
M3 Main circulation pump
M4 Circulating pump for DHW
M5 Circulation pump of direct heating circle 1
M6 Circulation pump of mixing-heating circle 2
M7 Mixing valve of mixing-heating circle 2
M9 Circulation pump of mixing-heating circle 3
M10 Mixing valve of mixing-heating circle 3
M11 Circulation pump of mixing-heating circle 4
M12 Mixing valve of mixing-heating circle
To Next Page
Loading...
Need help?
General