ENGLISH
21
Limited Mode
• Congure TV function’s limitation. When selected to ‘On’, following sub-menus will be worked by below.
Setup Menu
• Permit to tune and manage programmes as 'On' (permitted) or 'O' (not permitted).
Programme Change
(Depending on model)
• Decide to change programme or not by setting ‘Programme Change' as ‘On’(Change Possible) or ‘O’(Change Impossible) when present source
is TV.
-
When ‘Programme Change' is set to Off. (Change Impossible)
» Programme Key, Numeral Key, List Key, Q.View Key don't work and entering 'Programme Menu' in the Main Menu OSD is impossible.
» ‘Programme' item in 'On Time' menu will be fixed.
» Entering 'Programmes' in the 'Main Menu’ OSD is impossible regardless of 'Programmes' item.
-
When 'Programme Change’ is set to On (Change Possible), ‘Programme Key’, ‘Numeric Key’, ‘List Key’, ‘Q.View’ Key, 'TV/RAD Key' does
work and entering ‘Programme Menu' in the Main Menu OSD is possible.
Menu Display
• Function to decide whether work with menu (including relevant menus too) of control key (On – Enter possible) or not (O – Enter
Impossible).
-
Although select Off (Enter impossible), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ is available.
-
When select On (Enter possible), Menu works.
OSD Display
• Decide to display OSD or not by setting ‘OSD Display’ as On (Display) or O (Do not Display).
-
When ‘OSD Display’ is set to ‘Off’(Do not Display), all OSD is not displayed except some exception.
-
Although select ‘Off’ (Do not Display), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ and entering service
menu are available. (In-Start, Power-Only, Adjust, Installation Menu...)
System Provider Mode
• ‘System Provider Mode’ allows access to the menu system from the front panel or remote control but access is controlled as follows:
-
When value is ‘On’, Accessible Items on the menu system, others are not permissible. (Depending on model)
» Input select screens
» Sleep timer
» Aspect Ratio
» Subtitles
» Programmes (Except for Programme Tuning & Settings and Programme Manager)
» ‘Safety’ / 'Photo & Video' / 'Music' / ‘Network’ / ‘Bluetooth’ Menu
-
If the programme map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’, ‘CH+’, ‘CH-’ keys.
DTV Programme Update
• It is a mode to set whether to update dtv Programme automatically or not.
• When DTV Programme Update is set to ‘Auto’, the function to update TV’s programme map according to dtv programme’s stream information.
• DTV Programme Update is set to ‘Manual’, the function to keep TV’s programme map even though dtv programme’s information is changed.
To Next Page
Loading...
Need help?
General
