ENGLISH
31
External Speaker
(Depending on model)
Volume Control
• Selects the volume control method of an external speaker.
• You can select ‘O’, ‘Int Variable’ Fixed. ‘Ext Variable’. (Depending on model)
• Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 2 Watts.
• Int variable is linked to the main volume OSD and change the volume 0 - 2 Watts.
• Fixed produces a xed output. The default is O.
Output
• This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps. (0.01/0.03/0.05/0.1/0.2/0.5/1/1.5/2 Watts).
• The Default is 1 Watt.
• Some models support the volume up to 1Watts.
Set ID Setup
Set ID Lock
• Set the ‘Set ID’ item in GENERAL Menu whether to activate or not.
• Set to On (Work) or O (Do Not Work).
Set ID
• Set the ‘Set ID’ of TV Set with 1~99.
Power Saving
Static Saving
• It is the item for setting the level to reduce the backlight control from the items for saving the consuming power, which is increased or
decreased by 10 steps from 0 to 100. 100 makes the consuming power set to the same one from the TV. 0 reduces the consuming power to the
minimum. The default value is 100.
-
The value displayed at the OSD is not changed and only the actual setting value is converted to percentage based on the static saving
value to set.
-
0 ~ 30: HIGH, 40 ~ 60 : MID, 70 ~ 90 : LOW, 100 : OFF.
Keyless Off Hours
• Automatically TV will be turned o if there is no key input for the preset time period.
To Next Page
Loading...
Need help?
General
