LG V280 User Manual

12
Before Operation-VCR part
How to use the main menu
This DVD+VCR can easily be programmed by using the
menus displayed on screen.
The menus are controlled by the Remote Control
Handset.
1. Switch on your TV set and DVD+VCR by pressing the
POWER button.
2. Press i button.
The main menu will appear on the TV screen.

REC - Timer recording setting (see p. 21).

PR SET - Manual tuning setting (see p. 13).

ACMS - ACMS (Automatic Channel Memory
System) (see p. 12).

SET - Date & clock setting (see p. 11).

SYS - To set the Colour TV System (see p. 11).

1 W ON/OFF - Power Save Mode (see p. 24).

(Dr.) - To check a problem with your VCR
(see p. 24).

F.OSD ON/OFF - To display the operational
mode of your VCR
(see p. 23).

(16:9/4:3) - To select the aspect ratio of your
TV (see p. 24).

DECODER - To use a pay-TV decoder
(or Satellite) with your VCR
( see p. 23 ).

(OPR) - To improve the playback picture
(see p. 19).
Appear when playback only.
O NIC - To activate or deactivate the NICAM digital
sound ( see p. 23 ).
Tip
You can change the menu language on the DVD setup
menu. (See the Menu Language on page 16.)
3. Press 1 and 2 to select the desired menu.
Press ENTER/OK and use 3 or 4 to select.
4. Press i to return to a TV picture.
Tuning in TV Stations Automatically
If the TV broadcast signal is weak your DVD+VCR may
not detect the necessary information and will not be able
to store them correctly. To overcome this problem please
turn to the MANUAL TUNING section on page 13.
1. Press POWER to turn on your DVD+VCR.
2. Press i button.
The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS.
Press ENTER/OK.
3. Select the country according to your area with 1
or 2.
A:Austria, B:Belgium, CH:Switzerland, D:Germany,
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,
NL:Netherlands, P:Portugal, S:Sweden, SF:Finland,
“OTHERS”
4. Press ENTER/OK to start the automatic storing of
the channels of the TV stations in your area.
5. The TV STATION TABLE will appear when tuning is
completed.
Press i to save your settings.
SYS
12
SET
OSD
ON
OFF
OSD
f
SYS
12
SET
OSD
ON
OFF
OSD
f
ACMS
Pr-12
ACMS
Pr-12
OK i
A
NNL PSSFOTHERS
B D DK EFI
OK i
Pr-12
ACMS
CH
OK i
,DELETE:
MOVE:
P
SET
R
02 C03 00
03 C04 00
04 C05 00
05 C06 00
06 C07 00
07 C08 00
08 C09 00
01 C02 00
BRTN
RTBF1
RTBF2
RAI 1
RAI 2
RAI 3
TVE
TVE 1
01 C02 00
02 C03 00
03 C04 00
ES
i
Pr-12
ACMS
TVE 1
BRTN
RTBF1

LG V280 Specifications

General

power requirements	AC 200-240V, 50/60 Hz
power consumption	17W
operating temperature	5˚C to 35˚C (41˚F to 95˚F)
operating humidity	5 % to 90 %
laser wavelength	650 nm
frequency response (DVD PCM 96 kHz)	8 Hz to 44 kHz
frequency response (DVD PCM 48 kHz)	8 Hz to 22 kHz
frequency response (CD)	8 Hz to 20 kHz
signal-to-noise ratio	More than 100dB
harmonic distortion	Less than 0.008%
dynamic range (DVD)	More than 100 dB
dynamic range (CD)	More than 95 dB
audio input (VCR SCART)	-6.0dBm, more than 10 kohms
audio input (VCR RCA)	-6.0dBm, more than 47 kohms
video input (VCR SCART/RCA)	1.0 Vp-p, 75 ohms
video output (DVD)	1 Vp-p 75 ohms, sync negative
component video output (Y)	1.0 V (p-p), 75 Ω
component video output (Pb/Pr)	0.7 V (p-p), 75 Ω
RGB output (DVD)	0.7 Vp-p, 75 ohms
audio output (coaxial audio DVD)	0.5 V (p-p), 75 Ω
audio output (analog audio DVD)	2.0 Vrms (1 KHz, 0 dB), 600 Ω
audio output (VCR SCART)	-6.0dBm, less than 1 kohms
video output (VCR SCART)	1.0Vp-p, 75 ohms
RGB output (VCR)	0.7 Vp-p, 75 ohms

Weight and Dimensions

dimensions	430 x 78.5 x 265 mm (W x H x D)
mass	4.2 kg