LG W2241S-BF User Manual

A18
Troubleshooting
Have you installed the display driver?
● Have you installed the
display driver?
● Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
● The screen color is
mono or abnormal.
● The screen blinks.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.

LG W2241S-BF Specifications

General

Pixel pitch	0.282 x 0.282 mm
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (typical)	8000:1
Viewing angle, horizontal	170 °
Display brightness (typical)	300 cd/m²
Special features	Pb Free, Flatron F engine Intelligent Auto, 4:3 in Wide (ARC)
HDCP	Yes
Certification	TCO '03
Product color	Black
Market positioning	-
Compliance industry standards	DDC 2B
Panel mounting interface	75 x 75 mm
Power consumption (standby)	1 W
Power consumption (typical)	40 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	209 mm
Width (with stand)	516 mm
Height (with stand)	418 mm
Weight (with stand)	4500 g