To Next Page

To Previous Page

Using the Computer

1. Make sure to turn off the computer and product. Connect the cable as below sketch map

form to .

2. Press button on the front switch panel to turn the

power on. When monitor power is turned on, the

'Self Image Setting Function' is executed automatically.

Connecting the Display

MAC

PUSH

Wall-outlet type

Power Cord

Analog signal

D-sub

Connect Dsub Cable (PC)

Connect Dsub Cable (Mac)

PC-outlet type

Mac adapter

For Apple Macintosh use, a separate plug adapter is

needed to change the 15 pin high density (3 row) D-

sub VGA connector on the supplied cable to a 15 pin

2 row connector.

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user

connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual

input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted

screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve

resolution.

Questions and Answers:

Need help?

Do you have a question about the LG W2241S-BF and is the answer not in the manual?

LG W2241S-BF Specifications

General

Pixel pitch	0.282 x 0.282 mm
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (typical)	8000:1
Viewing angle, horizontal	170 °
Display brightness (typical)	300 cd/m²
Special features	Pb Free, Flatron F engine Intelligent Auto, 4:3 in Wide (ARC)
HDCP	Yes
Certification	TCO '03
Product color	Black
Market positioning	-
Compliance industry standards	DDC 2B
Panel mounting interface	75 x 75 mm
Power consumption (standby)	1 W
Power consumption (typical)	40 W
Sustainability certificates	ENERGY STAR