To Next Page

To Previous Page

Troubleshooting

Have you installed the display driver?

●

Have you installed the

display driver?

●

Do you see an

"Unrecognized monitor,

Plug&Play (VESA DDC)

monitor found"

message?

•

Be sure to install the display driver from the display

driver CD (or diskette) that comes with your

display. Or, you can also download the driver from

our web site: http://www.lge.com.

•

Make sure to check if the video card supports

Plug&Play function.

Display image is incorrect

● The screen color is

mono or abnormal.

● The screen blinks.

•

Check if the signal cable is properly connected

and use a screwdriver to fasten if necessary.

•

Make sure the video card is properly inserted in

the slot.

•

Set the color setting higher than 24 bits (true color)

at Control Panel - Settings.

•

Check if the screen is set to interlace mode and if

yes, change it to the recommend resolution.

A20

Questions and Answers:

Need help?

Do you have a question about the LG W2243S and is the answer not in the manual?

LG W2243S Specifications

General

3D	No
Pixel pitch	0.248 x 0.248 mm
Aspect ratio	16:9
Display diagonal	21.5 \
Sync-on-green (SOG)	Yes
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	30000:1
Display number of colors	16.78 million colors
Display brightness (typical)	- cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	-
DVI-D ports quantity	0
Product color	Black
Compliance industry standards	DDC 2B
LED indicators	Power
Tilt angle range	-5 - 15 °
Panel mounting interface	- mm
Input current	1 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	40 W
Package depth	449 mm
Package width	582 mm
Package height	127 mm
Package weight	5500 g
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions