To Next Page

To Previous Page

Using the Computer

1. Make sure to turn off the computer and product. Connect the cable as below sketch map

form to .

2. Press button on the front switch panel to turn the

power on. When monitor power is turned on, the

'Self Image Setting Function' is executed automatically.

Connecting the Display

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user

connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual

input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted

screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve

resolution.

Mac adapter

Varies according to model.

Signal Cable

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high

density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

Wall-outlet type

Power Cord

Connect D-sub Cable (PC)

Connect D-sub Cable (Mac)

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as

shown.

User must use shielded signal interface cables (D-sub 15 pin cable) with

ferrite cores to maintain standard compliance for the product.

Questions and Answers:

Need help?

Do you have a question about the LG W2243S and is the answer not in the manual?

LG W2243S Specifications

General

3D	No
Pixel pitch	0.248 x 0.248 mm
Aspect ratio	16:9
Display diagonal	21.5 \
Sync-on-green (SOG)	Yes
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	30000:1
Display number of colors	16.78 million colors
Display brightness (typical)	- cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	-
DVI-D ports quantity	0
Product color	Black
Compliance industry standards	DDC 2B
LED indicators	Power
Tilt angle range	-5 - 15 °
Panel mounting interface	- mm
Input current	1 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	40 W
Package depth	449 mm
Package width	582 mm
Package height	127 mm
Package weight	5500 g
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions