Additional Function Options
D
elay Start Wash
13
3
Delay Start wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
When you press the START/PAUSE button,
the light will blink.
Select the program for laundry on the control panel.
You cannot use DELAY START with the woolen setting.
The time changes as following
order (3 4
Hours).
Press the POWER button to turn power on.
Press the PROGRAM button to select the washing program.
Add the laundry and press the START/PAUSE button.
Press the DELAY START button to set the time when the delayed
washing is to be completed.
The appropriate amount of detergent is marked at the
WaterDetergent on the water level button.
Add the detergent.
Water will be supplied 2 minutes into the wash cycle
to supplement the water the laundry has absorbed.
Close the lid.
The washing will be finished according to the delayed time.
To select washing program, process, water level, wash option, or water temperature manually,
press the DELAY START button and select the desired option. Then press the
START/PAUSE button.
Finish
When the laundry cannot be taken out immediately after the wash program ends, it is better to
omit the spinning program. The laundry will be wrinkled if it is left for a long time after
spinning.
Note
If the lid is open, the machine will not work and an alarm signal will alarm to remind you to
close the lid.
1
2
5
4
6
To Next Page
Loading...
Need help?
General
