HOW TO CONNECT THE INLET HOSE
• Verify that the rubber washer is inside of the
valve connector.
• Tighten the inlet hose securely to prevent leaks.
• CONNECT THE DRAIN HOSE
Make sure that the hose is not twisted. Avoid submerging the end of the hose.
•_ The end of the drain hose should be placed less than 96" from the floor.
• CONNECT POWER PLUG
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, as
doing so may cause a fire.
9
To Next Page
Loading...
Need help?
General
