EasyManuals Logo
Home>LG>Washer>WM4370HKA

LG WM4370HKA User Manual

LG WM4370HKA
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
INSTALLATION
Connecting the Water Lines
1
Check the rubber seals on both sides of the hose.
- Insert a rubber seal into the threaded fittings on
each hose to prevent leaking.
Rubber seal
Water hose
(To water inlet on the
washing machine)
Rubber seal
Water hose
(To faucet)
2
Connect the water supply hoses to the HOT and
COLD water faucets tightly by hand and then
tighten another 2/3 turn with pliers.
- Connect the blue hose to a cold water faucet and
the red hose to a hot water faucet.
WARNING
y
Do not overtighten.
Damage to the coupling can
result.
3
After connecting inlet hose to water faucets,
turn on the water faucets to flush out foreign
substances (dirt, sand or sawdust) in the water
lines. Let water drain into a bucket, and check the
water temperature.
4
Connect the hoses to the water inlets tightly
by hand and then tighten another 2/3 turn with
pliers.
- Connect the blue hose to the cold water inlet
and the red hose to the hot water inlet.
Cold
water
inlet
Hot water
inlet
WARNING
y
Do not overtighten the hoses.
Overtightening
can damage the valves resulting in leaking and
property damage.
5
Check for leaks by turning on the faucets.
- If water leaks, check steps 1 to 4 again.
NOTE
y
For your safety, and for extended product
life, use only authorized components. The
manufacturer is not responsible for product
malfunction or accidents caused by the use
of separately purchased, unauthorized parts.
y
Use new hoses when you install the washing
machine. Do not reuse old hoses. LG does
not recommend the use of aftermarket
hoses.
y
Periodically check the hoses for cracks, leaks
and wear, and replace the hoses every five
years.
y
Do not stretch the water hoses intentionally,
and make sure that they are not crushed by
other objects.
y
Water supply pressure must be between 20
psi and 120 psi (138–827 kPa). If the water
supply pressure is more than 120 psi, a
pressure reducing valve must be installed.
y
To provide optimum washing performance
the hot water temperature should be set
at 120-135°F (48-57°C) and the cold at 60°F
(15°C).
MFL68005550_E.indd 14 16. 7. 28. 오후 10:30

Table of Contents

Other manuals for LG WM4370HKA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG WM4370HKA and is the answer not in the manual?

LG WM4370HKA Specifications

General IconGeneral
Stylefront load
Colorblack stainless steel
Washer Capacity4.5 cubic feet
Max Spin Speed1300 revolutions per minute
Spin Speeds5
Number of Cycles14
Cycle Selectionscotton/normal, perm. press, delicates, speed wash, tubclean, bulky/large, hand wash/wool, sanitary, allergiene, heavy duty, brightwhites, towels, drain+spin, download
Optionsprewash, delay wash, extra rinse, drum light, rinse+spin, child lock, coldwash, steam, freshcare, turbowash, add garment
Noise levelyes
Temperature Settings5
Temperature Selectionsextra hot, hot, warm, cold, tap cold (all cold rinses)
Soil Levelslight, normal, heavy
Internal Heateryes
Control Paneldial, touchpad
Delay Start / Endyes
Child Lockyes
Cycle Signalyes
Interior Lightyes
Steamyes
Dispensersingle load
Smart Homesmartdiagnosis, energy monitoring, cycle monitoring, remote start, maintenance alerts, performance tips, true
Wi-Fiwi-fi
Annual Energy Consumption105 kilowatt hours
Voltage120 volts
Current10 amperes
Weight and Dimensions IconWeight and Dimensions
Depth30 1/4 inches
Height38 3/4 inches
Width27 inches
Net Weight202.82 pounds

Related product manuals