22
OPERATION
OPERATION
Using the Washer
Load the laundry into the washing machine and close the door.
1
2
3
4
5
6
Press
A
.
- The lights around the cycle selector knob will illuminate and a chime will sound.
Turn
B
to the desired cycle.
- The proper default option is automatically set according to the wash cycle. See
page 23,
Cycle Guide,
for more detailed default options for each cycle.
- See page 24,
Wash Cycles,
for details on the wash cycles.
- To change the options, press the option button and select the desired option.
See page 25,
Setting Options before Cycle,
for more details on options.
- Skip to step 4 to use the default setting without changing the options.
Add the proper amount of detergent and additions (bleach, softener) into the
detergent dispenser drawer.
- See page 20,
Using Detergent/Fabric Softener,
for more details on using
detergent.
Press
C
.
- The washing machine will start.
When the melody plays, the wash cycle is finished.
- When the washing cycle is finished, the door will unlock. Open the door and
remove the laundry immediately.
- Make sure to check around the door seal when taking out the finished load.
Small items may be caught in the door seal.
NOTE
y
The front-loading washing machine rotates the laundry in a way that allows it to use less water while still
fully saturating your clothing. It is normal to not be able to see water during the wash cycle.
y
If the temperature or the water level inside the machine is too high, the door locks and cannot be
opened. To open the door while washing, use the Rinse + Spin feature.
WARNING
y
To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
MFL68005550_E.indd 22 16. 7. 28. 오후 10:30
To Next Page
Loading...
Need help?
General
Weight and Dimensions
