16
3-3. FUNCTION OF EACH BUTTON
WATER TEMPERATURE
BUTTON (OPTION)
•
Use to select Water
Temperature.
Pressing the button allows
you to select COLD
WARM (HOT&COLD)
HOT COLD
respectively.
AIR DRY
• This button is used for air-
drying of your laundry.
•Air dry selections light up in
sequence as follows.
60 90 120 60 as the
button is pushed.
• Press the button for 3 seconds
to select and press the Power
botton to cancel the operation.
(refer to page 22)
SOIL LEVEL BUTTON
• This button allows you
to select the strength of
the wash action.
• Power option selections
light up in sequence as
follows Normal Heavy
Light Normal as the
button is pushed.
This can be selected for
any program.
•Adjustment can be made
while washing.
TUB DRY
• Use this when
you want to dry
Tub.
• This can be
set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)
WASH. RINSE. SPIN BUTTON
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed.
• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
•When the button is pressed
during washing, the
remaining time is displayed.
CHILD LOCK FUNCTION
•
Use to lock or unlock the
control buttons to prevent
settings from being
changed by a child.
To lock, push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process.
(refer to page 25)
WATER LEVEL BUTTON
• Use to select the proper amount of water in
relation to the weight and type of laundry.
• Automatically controlled, but can be selected
manually by pressing the WATER LEVEL
Button.
• WATER LEVEL is automatically selected for
FUZZY program.
The following settings are indicated as the
button is pushed
7 8 9 10 1 2 3 4 5 6 7
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
•
Time left - During operation, the remaining
time is indicated.
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication - When an error occurs, an
error message appears to indicate the
abnormality. For example, indicates that
the lid is open.
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at
maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is excessive,the machine will automatically add one or two rinses in order to improve the
rinse performance.
* The Detergent sensor will make algorithm changes to compensate for detergent quantity, only if the detergent powder
is synthetic based, If a liquid or organic based detergent is used, or too much bleaching agent, the detecting ability of
the sensor may be decreased.
NOTE
To Next Page
Need help?
General
