Chapter 1 Introduction
8
~
Mains
-
-~
output
Bypass
Fig 1-12
1.6 Basic Functions
Battery Management Function - The UPS has advanced battery management
functions including battery fault detection and backup time forecast.
Soft Start Function - Complete delay soft start function can reduce the surge to the
UPS unit and utility source.
Alarm and Protection Function - The UPS can generator audible and visual alarm
through LCD, input/output contacts and network transmission. It can help
maintenance personnel to locate and clear the faults that are sent out in time,
accurately and in detail.
Dark Start Function - When the utility is unavailable, the UPS can start from battery
that is connected to the DC Bus.
Automatic Re-start when Utility returns - This function only applies to the UPS that
has batteries. The UPS shuts down due to low battery, and restart automatically
when the utility returns. At this time , its operation mode is the one before the utility
fails.
Monitoring Functions - The UPS monitoring system has an advanced monitoring
function and parallel control functions. It supports flexible network monitoring to
satisfy different customer requirements.
1.7 Specifications
1. Functional Parameters
To Next Page
Loading...
Need help?
General
