E-5
The UB-512 has several modes available to fit your blood pressure monitoring
needs.
Normal Measurement with Readings Stored in Memory
Press the START 1 or START 2 button. Your blood pressure is measured and the
reading is stored into memory. Each START button can store up to 30 readings in
memory.
Recalling Previous Measurements
To recall previous measurements in memory, press and hold the START 1 or
START 2 button. Release the button after you see the first reading recalled from
memory. The previous measurements are displayed from most recent to oldest.
Clearing Memory
Remove batteries to clear memory. Insert batteries again to resume blood pressure
measurements.
Taking a Measurement without Reading Stored in Memory (Guest Mode)
This mode can be used when there is a third person taking measurements or
storing readings in memory is not desired. Press both the START 1 and START 2
buttons at the same time. A reading will be taken, but not stored into memory.
TAKING YOUR BLOOD PRESSURE
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
To Next Page
Loading...
Need help?
General
