Linear DMC1 User Manual

1
TOOLS REQUIRED
The DMC1 installation rough-in should be made during new
construction prior to drywall installation.
Rough-in boxes are used for Door Stations, Patio Stations,
and the DMC1 Master Station. Rough-in rings are used for
the Room Stations, and in-wall speakers. In the illustration
below, rough-in components are listed in parentheses near
the model(s) they fi t.
The tools required for the installation rough-in are:
• Power drill with 1” auger.
• #2 Phillips screwdriver
• Wire stripper/cutter
• Tape measure
•Level
DMC1 Music/Communication System (DMC1H Housing Required)
DMCMP3 CD/MP3 Player
CAT5
Audio Coax
CAT5
MC3
or
MC8
Modular
Door
Chime
Antennas
Included with
Wall Housing
AM FM
CAT5
CAT5
DMC1RW
Patio Station
DMC1R
Standard Room Station
DMC1RS
Standard Room Station
w/Remote Scan
Supports up to 15 room or patio stations and / or
speakers (ALL TYPES 15 TOTAL)
Security Panel
Dry Contact
Closure for
Panic Operation
Dry Contact
Closure
Door Release
Remote Power
Transformer
Door Release
Mechanism
RT11
DRW
Either
MVC1
Volume Control
(1-Gang Box)
MS2SX5SC
(NR8-5)(NR8-5)
(DMC1HR)
(DMC1HRW or DMC1HRWS)
(DMC1HR)
Audio Input
Wall Plate
for External
Audio Source
DS3B
Door Speaker
w/Bell Button
(ME3)
MS4DCXSC
This diagram is for product reference only.
Refer to the installation instructions for
product limits and specifications.
Model numbers in parentheses represent
standard rough-in components.
DMC1
EXAMPLE
SYSTEM
DIAGRAM
Door Stations
Available in
White, Bright Brass,
Antique Brass,
or Nickel
(DMC1F Frame Required)
(DMC1HC Housing Required)
NR8P
8" Flush Mount
Speaker
NR8P
8" Flush Mount
Speaker
Figure 1. System Diagram

Linear DMC1 Specifications

General

Brand	Linear
Model	DMC1
Category	Intercom System
Language	English