Linksys E3000 User Manual

Linksys E3000 Chapter 2: Cisco Connect
7
High Performance Wireless-N Router
Create or Update the Easy Setup Key
If you do not have an Easy Setup Key, then you can create
one using a USB flash drive. If you already have an Easy
Setup Key, then you can update it with the Router’s
current settings.
1. Insert the Easy Setup Key or a USB flash drive into an
available USB port on your computer.
Update or Create an Easy Setup Key
2. Please wait while settings are copied to the Easy Setup
Key.
Copying Files to the Easy Setup Key
3. Remove the Easy Setup Key. You can now use it to
connect other computers to the Router (for more
information, refer to Connect with the Easy Setup Key,
page 6). Click Close.
Easy Setup Key Has Been Updated
Connect Manually
1. Enter the Network name (SSID), Security Key, and Security
Type settings on your wireless device (SSID stands for
Service Set Identifier). To print this information, click
Print these settings.
Connecting a Device
2. After your device connects, click Next.
3. Enter a name that will be used to identify this device.
Then click Finish.
Name Your Device
Wireless Printer
1. Refer to your printer’s documentation to learn how to
connect it to a wireless printer.
2. Enter the Network name (SSID), Security Key, and
Security Type settings on your wireless printer. To print
this information, click Print these settings.
Connecting a Wireless Printer

Linksys E3000 Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Bandwidth	2.4 GHz
Compatibility	Mac PC
Input current	2 A
Input voltage	12 V
xDSL connection	No
Dimensions (WxDxH)	225 x 180 x 35 mm
USB ports quantity	1
Minimum system requirements	Internet Explorer 6, Safari 3, Firefox 2 Wireless Network-Enabled
Compatible operating systems	Windows XP SP3, Windows Vista SP1, Windows 7 Mac OS X Tiger 10.4.11, Leopard 10.5.8, Snow Leopard 10.6.1
WLAN data transfer rates supported	300 Mbit/s
DHCP client	-
Antennas quantity	3
Ethernet LAN (RJ-45) ports	4
Security algorithms	128-bit WEP, WPA, WPA2
Bundled software	Setup Software User Guide
Certification	FCC, IC, CE, Wi-Fi A/B/G/N
Product color	Black, Blue
LED indicators	Power, USB, Internet, Wireless, Wi-Fi Protected Setup, Ethernet (1-4)
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Weight	452 g