Linksys E3000 User Manual

39
High Performance Wireless-N Router
Linksys E3000 Chapter 3: Advanced Configuration
UPnP If you want to use UPnP, keep the default, Enabled.
Otherwise, select Disabled.
Allow Users to Configure Keep the default, Enabled,
if you want to be able to make manual changes to the
Router while using the UPnP feature. Otherwise, select
Disabled.
Allow Users to Disable Internet Access Select Enabled,
if you want to be able to prohibit any and all Internet
connections. Otherwise, keep the default, Disabled.
Backup and Restore
Backup Configurations To back up the Router’s
configuration settings, click this button and follow the
on-screen instructions.
Restore Configurations To restore the Router’s
configuration settings, click this button and follow the on-
screen instructions. (You must have previously backed up
the Router’s configuration settings.)
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Administration > Log
The Router can keep logs of all traffic for your Internet
connection.
Administration > Log
Log
Log To disable the Log function, select Disabled. To
monitor traffic between the network and the Internet,
keep the default, Enabled. With logging enabled, you can
choose to view temporary logs.
Logviewer IP Address If your computer uses Logviewer
software, you can enter the fixed IP address of the
computer running the software. The Router will now send
updated logs to that computer.
When you wish to view the logs, click View Log.
• Save the Log Click this option to save this information
to a file on your computer’s hard drive.
• Refresh Click this option to update the log.
• Clear Click this option to clear all the information that
is displayed.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet.
Administration > Diagnostics
Diagnostics
Ping Test
Ping checks the status of a connection.
IP or URL Address Enter the address of the PC whose
connection you wish to test.
Packet Size Enter the packet size you want to use. The
default is 32 bytes.
Number to Ping Enter the number of times you wish to
test the connection. The default is 5.
Start Test To run the test, click this button. The Ping
screen shows if the test is successful. Click Close to return
to the Diagnostics screen. Click Stop to stop the test.
Ping

Linksys E3000 Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Bandwidth	2.4 GHz
Compatibility	Mac PC
Input current	2 A
Input voltage	12 V
xDSL connection	No
Dimensions (WxDxH)	225 x 180 x 35 mm
USB ports quantity	1
Minimum system requirements	Internet Explorer 6, Safari 3, Firefox 2 Wireless Network-Enabled
Compatible operating systems	Windows XP SP3, Windows Vista SP1, Windows 7 Mac OS X Tiger 10.4.11, Leopard 10.5.8, Snow Leopard 10.6.1
WLAN data transfer rates supported	300 Mbit/s
DHCP client	-
Antennas quantity	3
Ethernet LAN (RJ-45) ports	4
Security algorithms	128-bit WEP, WPA, WPA2
Bundled software	Setup Software User Guide
Certification	FCC, IC, CE, Wi-Fi A/B/G/N
Product color	Black, Blue
LED indicators	Power, USB, Internet, Wireless, Wi-Fi Protected Setup, Ethernet (1-4)
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Weight	452 g