EasyManuals Logo
Home>Linksys>Wireless Router>E3000

Linksys E3000 User Manual

Linksys E3000
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
23
High Performance Wireless-N Router
Linksys E3000 Chapter 3: Advanced Configuration
WPA Personal
NOTE: If you are using WPA2 or WPA, each
device in your wireless network MUST use the
same WPA method and shared key, or else the
network will not function properly.
WPA Personal
Passphrase Enter a passphrase of 8-63 characters.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
IMPORTANT: If you are using WEP encryption,
each device in your wireless network MUST
use the same WEP encryption method and
encryption key, or else your wireless network will
not function properly.
WEP
Encryption Select a level of WEP encryption, 64 bits
10 hex digits or 128 bits 26 hex digits. The default is
64 bits 10 hex digits.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key Select a default TX (Transmit) Key (choose which
Key to use). The default is 1.
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
IMPORTANT: If you are using WEP encryption,
each device in your wireless network MUST
use the same WEP encryption method and
encryption key, or else your wireless network will
not function properly.
RADIUS
RADIUS Server Enter the IP address of the RADIUS server.
RADIUS Port Enter the port number of the RADIUS
server. The default is 1812.
Shared Key Enter the key shared between the Router
and the server.
Encryption Select a level of WEP encryption, 64 bits
10 hex digits or 128 bits 26 hex digits. The default is
64 bits 10 hex digits.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key Select a default TX (Transmit) Key (choose which
Key to use). The default is 1.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes.

Table of Contents

Other manuals for Linksys E3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys E3000 and is the answer not in the manual?

Linksys E3000 Specifications

General IconGeneral
Ethernet LANYes
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Bandwidth2.4 GHz
CompatibilityMac PC
Input current2 A
Input voltage12 V
xDSL connectionNo
Dimensions (WxDxH)225 x 180 x 35 mm
USB ports quantity1
Minimum system requirementsInternet Explorer 6, Safari 3, Firefox 2 Wireless Network-Enabled
Compatible operating systemsWindows XP SP3, Windows Vista SP1, Windows 7 Mac OS X Tiger 10.4.11, Leopard 10.5.8, Snow Leopard 10.6.1
WLAN data transfer rates supported300 Mbit/s
DHCP client-
Antennas quantity3
Ethernet LAN (RJ-45) ports4
Security algorithms128-bit WEP, WPA, WPA2
Bundled softwareSetup Software User Guide
CertificationFCC, IC, CE, Wi-Fi A/B/G/N
Product colorBlack, Blue
LED indicatorsPower, USB, Internet, Wireless, Wi-Fi Protected Setup, Ethernet (1-4)
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight452 g

Related product manuals