Linksys E3000 User Manual

Linksys E3000 Appendix B: How to Install and Access USB Storage
50
High Performance Wireless-N Router
Access the USB Storage Device
1. On your desktop, double-click the My Computer icon.
My Computer Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2. In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
Setup > Basic Setup, page 13.
Enter Local IP Address of Router
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field.
3. Double-click the Public folder. (By default the Router
creates a shared folder called Public.)
Double-Click Public Folder
NOTE: If the USB storage device has
pre-existing folders, then you will have to
create shared folders so there is network
access to these pre-existing folders. Proceed to
Create a Shared Folder, page 55.
4. Enter your account user name and password. (For the
admin account, admin is both the default user name
and password.) Click OK.
Enter Account User Name and Password
User accounts are set up on the Storage >
Administration screen; for more information, refer to
Storage > Administration, page 31.
Map a Drive
1. On your desktop, double-click the My Computer icon.
My Computer Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2. In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1. You can change this IP
address on the Setup > Basic Setup screen; refer to
Setup > Basic Setup, page 13.
Enter Local IP Address of Router
NOTE: Another option is to use the default server
name of the Router. In the Address field, enter:
\\Ciscoxxxxx (xxxxx represents the last
five digits of the Router’s serial number.)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field..

Linksys E3000 Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Bandwidth	2.4 GHz
Compatibility	Mac PC
Input current	2 A
Input voltage	12 V
xDSL connection	No
Dimensions (WxDxH)	225 x 180 x 35 mm
USB ports quantity	1
Minimum system requirements	Internet Explorer 6, Safari 3, Firefox 2 Wireless Network-Enabled
Compatible operating systems	Windows XP SP3, Windows Vista SP1, Windows 7 Mac OS X Tiger 10.4.11, Leopard 10.5.8, Snow Leopard 10.6.1
WLAN data transfer rates supported	300 Mbit/s
DHCP client	-
Antennas quantity	3
Ethernet LAN (RJ-45) ports	4
Security algorithms	128-bit WEP, WPA, WPA2
Bundled software	Setup Software User Guide
Certification	FCC, IC, CE, Wi-Fi A/B/G/N
Product color	Black, Blue
LED indicators	Power, USB, Internet, Wireless, Wi-Fi Protected Setup, Ethernet (1-4)
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Weight	452 g