Linksys LAPAC2600 User Manual

ACL Profile
ACL Name
A name can include from 1 to 32 alphanumeric
characters to identify an ACL.
ACL Type
Configuration type of ACL is IPv4 or IPv6. Click Add
ACL to add one new ACL profile.
Rule Configuration
ACL Names
Select a profile to configure. An ACL profile includes
ACL name and type. Click Delete ACL to delete an
ACL.
Rule Index
Select and configure a new rule for the selected ACL.
Enable Rule
Enable or disable the ACL rule. It's disabled by
default.
Action
Whether the ACL rule permits or denies an action.
Match Every Packet
Rule matches the frame or packet regardless of its
contents.
If this is checked, you cannot configure any other
matching condition listed below; e.g, Protocol, Source
IP/Port, Destination IP/Port.
Match Protocol
Use a Layer 3 or Layer 4 protocol as a matching
condition. Set the protocol value with following
methods.

Select From List
IP – Internet Protocol
ICMP – Internet Control Message Protocol
IGMP – Internet Group Management Protocol
TCP – Transmission Control Protocol
UDP – User Datagram Protocol

Match to Value
Set a protocol with protocol ID from 0 to 255.
78

Linksys LAPAC2600 Specifications

General

2.4 GHz	Yes
Frequency band	2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Channels quantity	13 channels
Number of VLAN IDs	17
Fit AP mode features	Wireless distribution system (WDS)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.1x, IEEE 802.3at
Receiver sensitivity	802.11b 11Mbps: -85dBm 802.11a/g 54Mbps: -73dBm 802.11n HT20 MCS7: -67dBm 802.11n HT40 MCS7: -65dBm 802.11n HT40 MCS7: -65dBm
Virtual LAN features	SSID-based VLAN assignment
Wi-Fi data rate (max)	1733 Mbit/s
Ethernet LAN data rates	1000 Mbit/s
Maximum data transfer rate	2533 Mbit/s
Output current	2.5 A
Output voltage	12 V
Power consumption (max)	25 W
Internal	No
Placement	Ceiling, Wall
Certification	FCC: 47 CFR FCC Part 15, Subpart B, Class B; 47 CFR FCC Part 15, Subpart C; 47 CFR FCC Part 15, Subpart E CE: EN55022, Class B; EN61000-3-2; EN61000-3-3; 55024; EN 301 489-1 / EN 301 489-17, Class B; EN 300 328; EN 301 893; EN 62311; EN 50385
Product color	White
LED indicators	System
Cable lock slot type	Kensington
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Antenna features	Integrated antenna
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Security algorithms	802.1x RADIUS, HTTPS, SNMP, WPA, WPA2
Number of SSID supported	16
Service Set Identifier (SSID) features	Hidden SSID
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	243 mm
Width	237 mm
Height	43.69 mm
Weight	848 g