29
GB
Using the Features
Customising the Option Setting
OSD Language
Allows you to select your desired on screen menu language.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s
setting.
Clock The clock is set automatically when receiving a digital signal.
Off Time Allows you to set the off time that will automatically switch off the TV. Cycle through and
select from the following off time options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. /
Sat.~Sun. / Sunday.
On Time Allows you to set the on time that the TV will automatically switch on the TV and tune to the
source, channel and volume you select. Cycle through and select from the following on time
options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. / Sunday.
Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
The clock will be set automatically when receiving a digital signal. Time must be set before
using Sleep Timer function.
Press the
buttons to select a period of time after which the TV automatically switches to
standby mode: OFF / 10 / 20 / … / 180 / 240 min. The timer begins to count down from the
number of minutes selected.
Alternative
1. You may press the SLEEP button repeatedly to select the number of
minutes: OFF / 10 / 20 / … / 180 / 240 min directly.
2. To cancel the sleep time, press the SLEEP button repeatedly until Off
appears.
Auto Standby The unit will automatically switch to standby mode
4 hours after the last time the remote control was
used. A reminder screen will pop up and count
down before the unit switches to standby mode.
To turn off the auto standby function, press the MENU
button to display the main menu. Press the
buttons to select the Time option and then press the
OK button. Press the
buttons to select the Auto Standby option and then press the OK
button to select "Off". Press the EXIT button exit the main menu. To save energy you should
always turn the auto standby function back to "3H" or "4H".
Time Zone When you select a Time Zone city, the TV time is set by the time offset information based on
Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and
the time is set automatically by a digital signal.
4. Press the BACK button to return to the previous menu or press the
MENU button to return back to the main menu.
5. Press the EXIT button to exit the menu.
OK
The unit will automatically switch to standby
mode in 5 minutes.
Press the OK button to continue viewing.
If you turn the TV off after setting the sleep timer, the sleep timer setting
will be erased.
To Next Page
Loading...
Need help?
General
