Logik L32HE13 User Manual

17
Picture Mode Select among picture mode: Standard / Mild / Personal / Dynamic.
The default setting is Standard. Select Personal if you want to adjust
the picture settings yourself.
Contrast Adjusts the difference between light and dark levels in the picture. (for Personal mode)
Brightness Increases or decreases the amount of white in the picture. (for Personal mode)
Colour Controls the colour intensity. (for Personal mode)
Tint (For NTSC
format)
Adjusts the balance between red and green levels.
(Tint is only available for NTSC signal input via the SCART or AV IN.)
Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture. (for
Personal mode)
Colour
Temperature
Select among colour temperature: Cold / Normal / Warm.
Adjusts the colour components independently to achieve a warm or
cool colour. (for Personal mode)
• Cold: Increases blue tint
• Normal
• Warm: Increases red tint
Noise Reduction Reduces the noise level of the connected device: Off / Low / Middle
/ High.
Screen
(PC mode)
Adjusts the PC desktop content.
Auto
Adjust
Allows you to synchronise a PC signal
automatically.
Auto Adjust
H-Offset
V-Offset
Size
Phase
Position Reset
50
50
50
50
H-Offset Adjusts the position of the picture
left and right in the window.
V-Offset Adjusts the position of the picture up
and down in the window.
Size Adjusts the picture horizontally, in
linear properties
Phase Controls the signal phase, which
can improve focus clarity and image
stability based on the PC mode.
Position
Reset
Press to set the best screen position.
3. Press the MENU button to return to the previous menu, press again to
return to the main menu.
4. Press the EXIT button to exit the menu.
Picture Mode
Dynamic
Standard
Mild
Personal
BACK MENU
EXIT
Colour Temp
Cold
Normal
Warm
BACK MENU
EXIT
Noise Reduction
Off
Low
Middle
High
BACK MENU
EXIT
L32HE13_IB.indd 17 22/07/2013 12:10

Logik L32HE13 Specifications

General

Brand	Logik
Model	L32HE13
Category	TV
Language	English